mboxd: Rename lpc source files
Change-Id: I289618c90b2df8911e362397b7eab99403c86c05
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
diff --git a/lpc.c b/lpc.c
new file mode 100644
index 0000000..ff36318
--- /dev/null
+++ b/lpc.c
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: Apache-2.0
+// Copyright (C) 2018 IBM Corp.
+
+#define _GNU_SOURCE
+#include <assert.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <getopt.h>
+#include <limits.h>
+#include <poll.h>
+#include <stdbool.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <syslog.h>
+#include <signal.h>
+#include <sys/ioctl.h>
+#include <sys/mman.h>
+#include <sys/stat.h>
+#include <sys/timerfd.h>
+#include <sys/types.h>
+#include <time.h>
+#include <unistd.h>
+#include <inttypes.h>
+
+#include "mbox.h"
+#include "common.h"
+#include "lpc.h"
+#include "flash.h"
+#include <linux/aspeed-lpc-ctrl.h>
+
+#define LPC_CTRL_PATH "/dev/aspeed-lpc-ctrl"
+
+int __init_lpc_dev(struct mbox_context *context, const char *path)
+{
+ struct aspeed_lpc_ctrl_mapping map = {
+ .window_type = ASPEED_LPC_CTRL_WINDOW_MEMORY,
+ .window_id = 0, /* There's only one */
+ .flags = 0,
+ .addr = 0,
+ .offset = 0,
+ .size = 0
+ };
+ int fd;
+
+ /* Open LPC Device */
+ MSG_DBG("Opening %s\n", path);
+ fd = open(path, O_RDWR | O_SYNC);
+ if (fd < 0) {
+ MSG_ERR("Couldn't open %s with flags O_RDWR: %s\n",
+ path, strerror(errno));
+ return -errno;
+ }
+
+ context->fds[LPC_CTRL_FD].fd = fd;
+
+ /* Find Size of Reserved Memory Region */
+ MSG_DBG("Getting buffer size...\n");
+ if (ioctl(fd, ASPEED_LPC_CTRL_IOCTL_GET_SIZE, &map) < 0) {
+ MSG_ERR("Couldn't get lpc control buffer size: %s\n",
+ strerror(errno));
+ return -errno;
+ }
+
+ context->mem_size = map.size;
+ /* Map at the top of the 28-bit LPC firmware address space-0 */
+ context->lpc_base = 0x0FFFFFFF & -context->mem_size;
+
+ /* mmap the Reserved Memory Region */
+ MSG_DBG("Mapping in 0x%.8x bytes of %s\n", context->mem_size, path);
+ context->mem = mmap(NULL, context->mem_size, PROT_READ | PROT_WRITE,
+ MAP_SHARED, fd, 0);
+ if (context->mem == MAP_FAILED) {
+ MSG_ERR("Failed to map %s: %s\n", path, strerror(errno));
+ return -errno;
+ }
+
+ return 0;
+}
+
+int init_lpc_dev(struct mbox_context *context)
+{
+ return __init_lpc_dev(context, LPC_CTRL_PATH);
+}
+
+void free_lpc_dev(struct mbox_context *context)
+{
+ if (context->mem) {
+ munmap(context->mem, context->mem_size);
+ }
+ close(context->fds[LPC_CTRL_FD].fd);
+}
+
+/*
+ * point_to_flash() - Point the lpc bus mapping to the actual flash device
+ * @context: The mbox context pointer
+ *
+ * Return: 0 on success otherwise negative error code
+ */
+int point_to_flash(struct mbox_context *context)
+{
+ struct aspeed_lpc_ctrl_mapping map = {
+ .window_type = ASPEED_LPC_CTRL_WINDOW_FLASH,
+ .window_id = 0, /* Theres only one */
+ .flags = 0,
+ /*
+ * The mask is because the top nibble is the host LPC FW space,
+ * we want space 0.
+ */
+ .addr = 0x0FFFFFFF & -context->flash_size,
+ .offset = 0,
+ .size = context->flash_size
+ };
+
+ if (context->state & MAPS_FLASH) {
+ return 0; /* LPC Bus already points to flash */
+ }
+ /* Don't let the host access flash while we're suspended */
+ if (context->state & STATE_SUSPENDED) {
+ MSG_ERR("Can't point lpc mapping to flash while suspended\n");
+ return -MBOX_R_PARAM_ERROR;
+ }
+
+ MSG_INFO("Pointing HOST LPC bus at the flash\n");
+ MSG_INFO("Assuming %dMB of flash: HOST LPC 0x%08x\n",
+ context->flash_size >> 20, map.addr);
+
+ if (ioctl(context->fds[LPC_CTRL_FD].fd, ASPEED_LPC_CTRL_IOCTL_MAP, &map)
+ == -1) {
+ MSG_ERR("Failed to point the LPC BUS at the actual flash: %s\n",
+ strerror(errno));
+ return -MBOX_R_SYSTEM_ERROR;
+ }
+
+ context->state = ACTIVE_MAPS_FLASH;
+ /*
+ * Since the host now has access to the flash it can change it out from
+ * under us
+ */
+ return flash_set_bytemap(context, 0, context->flash_size, FLASH_DIRTY);
+}
+
+/*
+ * point_to_memory() - Point the lpc bus mapping to the reserved memory region
+ * @context: The mbox context pointer
+ *
+ * Return: 0 on success otherwise negative error code
+ */
+int point_to_memory(struct mbox_context *context)
+{
+ struct aspeed_lpc_ctrl_mapping map = {
+ .window_type = ASPEED_LPC_CTRL_WINDOW_MEMORY,
+ .window_id = 0, /* There's only one */
+ .flags = 0,
+ .addr = context->lpc_base,
+ .offset = 0,
+ .size = context->mem_size
+ };
+
+ if (context->state & MAPS_MEM) {
+ return 0; /* LPC Bus already points to reserved memory area */
+ }
+
+ MSG_INFO("Pointing HOST LPC bus at memory region %p of size 0x%.8x\n",
+ context->mem, context->mem_size);
+ MSG_INFO("LPC address 0x%.8x\n", map.addr);
+
+ if (ioctl(context->fds[LPC_CTRL_FD].fd, ASPEED_LPC_CTRL_IOCTL_MAP,
+ &map)) {
+ MSG_ERR("Failed to point the LPC BUS to memory: %s\n",
+ strerror(errno));
+ return -MBOX_R_SYSTEM_ERROR;
+ }
+
+ /* LPC now maps memory (keep suspended state) */
+ context->state = MAPS_MEM | (context->state & STATE_SUSPENDED);
+
+ return 0;
+}