MAINTAINERS: remove file

The MAINTAINERS file is deprecated in favor of OWNERS.

Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I44bde570301dc8c7d962686e84dcbf1940396fb9
1 file changed
tree: 6e76cc342d7fb7124a453208d33c6285209307d5
  1. src/
  2. test/
  3. .clang-format
  4. .shellcheck
  5. default.conf
  6. hostlogger.dreport
  7. hostlogger@.service
  8. LICENSE
  9. meson.build
  10. meson_options.txt
  11. OWNERS
  12. README.md
README.md

Host Logger

The main purpose of the Host Logger project is to handle and store host's console output data, such as boot logs or Linux kernel messages printed to the system console.

There are two modes in Host Logger.

Buffer mode: host logs are stored in a temporary buffer and flushed to a file according to the policy that can be defined with service parameters. It gives the ability to save the startup logs and shutdown logs in separate files.

Stream mode: host logs are forwarded into a server socket (e.g. a socket created by the rsyslog imuxsock module). It gives the ability to stream logs in almost realtime.

Architecture

Host Logger is a standalone service (daemon) that works on top of the obmc-console and uses its UNIX domain socket to read the console output.

The Buffer Mode

+-------------+                                       +----------------+
|    Host     | State  +---------------------+ Event  |   Host Logger  |
|             |------->|        D-Bus        |------->|                |
|             |        +---------------------+        | +------------+ |
|             |                                  D +--->| Log buffer | |
|             |        +---------------------+   a |  | +------+-----+ |
|             |        | obmc-console-server |   t |  |        V       |
| +---------+ |  Data  |   +-------------+   |   a |  | +------------+ |
| | console |--------->|   | UNIX socket |---------+  | |  Log file  | |
| +---------+ |        |   +-------------+   |        | +------------+ |
+-------------+        +---------------------+        +----------------+

Unlike the obmc-console project, where console output is a binary byte stream, the service in buffer mode interprets this stream: splits it into separate messages, adds a time stamp and pushes the message into an internal buffer. Maximum size of the buffer and flush conditions are controlled by service parameters.

The Stream Mode

+-----------+                               +-------------+      +------------+
|           |                               |             |      |            |
|   Host    |                               | Host Logger |      |  rsyslog   |
|           |                               |             |      | +--------+ |  +---------+
|           |                               |             |      | | omfile ----->Log Files|--+
|           |   +--------------------+      |             |      | +--------+ |  +---------+  |
|           |   |obmc-console-server |      |             |      |            |  +------------v---+
|+---------+|   |   +-------------+  |Stream|+-----------+|DGRAM | +--------+ |  | Redfish        |
|| console -----|-->| UNIX socket |---------->  Service  --------->|imuxsock| |  | LogService &   |
|+---------+|   |   +-------------+  |      |+-----------+|      | +--------+ |  | EventService   |
+-----------+   +--------------------+      +-------------+      +------------+  +----------------+

The service in stream mode forwards the byte stream into rsyslog via the imuxsock module. The log is persisted via the omfile module as soon as collected. It makes Host Logger leverage exsisting tools (rsyslog and logrotate). It also fits in the Redfish LogService and EventService architecture in OpenBMC.

Log buffer rotation policy

The Buffer Mode

Maximum buffer size can be defined in the service configuration using two ways:

  • Limits by size: buffer will store the last N messages, the oldest messages are removed. Controlled by BUF_MAXSIZE option.
  • Limits by time: buffer will store messages for the last N minutes, oldest messages are removed. Controlled by BUF_MAXTIME option.

Any of these parameters can be combined.

The Stream Mode

Rotation and compression are handled by the logrotate tool.

Log buffer flush policy

The Buffer Mode

Messages from the buffer will be written to a file when one of the following events occurs:

  • Host changes its state (start, reboot or shut down). The service watches the state via the D-Bus object specified in HOST_STATE parameter.
  • Size of the buffer reaches its limits controlled by BUF_MAXSIZE and BUF_MAXTIME parameters, this mode can be activated by FLUSH_FULL flag.
  • Signal SIGUSR1 is received (manual flush).

The Stream Mode

Logs are flushed as soon as they are collected.

Configuration

Configuration of the service is loaded from environment variables, so each instance of the service can have its own set of parameters. Environment files are stored in the directory /etc/hostlogger and must have the extension conf. The file name is the name of the associated Host logger instance and the instance of the obmc-console service (e.g. ttyVUART0).

Environment variables

Any of these variables can be omitted, in which cases default values are used. If variable's value has an invalid format, the service fails with an error.

  • SOCKET_ID: Socket Id used for connection with the host console. This Id shall match the "socket-id" parameter of obmc-console server. The default value is empty (single-host mode).
  • MODE: The mode that the service is running in. Possible values: buffer or stream. The default value is buffer.

The Buffer Mode

  • BUF_MAXSIZE: Max number of stored messages in the buffer. The default value is 3000 (0=unlimited).

  • BUF_MAXTIME: Max age of stored messages in minutes. The default value is 0 (unlimited).

  • FLUSH_FULL: Flush collected messages from buffer to a file when one of the buffer limits reaches a threshold value. At least one of BUF_MAXSIZE or BUF_MAXTIME must be defined. Possible values: true or false. The default value is false.

  • HOST_STATE: Flush collected messages from buffer to a file when the host changes its state. This variable must contain a valid path to the D-Bus object that provides host's state information. Object shall implement interfaces xyz.openbmc_project.State.Host and xyz.openbmc_project.State.OperatingSystem.Status. The default value is /xyz/openbmc_project/state/host0.

  • OUT_DIR: Absolute path to the output directory for log files. The default value is /var/lib/obmc/hostlogs.

  • MAX_FILES: Log files rotation, max number of files in the output directory, oldest files are removed. The default value is 10 (0=unlimited).

The Stream Mode

  • STREAM_DST: Absolute path to the output unix socket. The default value is /run/rsyslog/console_input.

Example

Remove file limits

Relevant for OpenPOWER based servers, using ttyVUART0 for console.

File phosphor-hostlogger_%.bbappend:

FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
SRC_URI_append = " file://ttyVUART0.conf"

File phosphor-hostlogger/ttyVUART0.conf:

MAX_FILES=0

Custom object for host state monitoring

Relevant for x86 based servers: using ttyS2 for console and /xyz/openbmc_project/state/os for host state monitoring.

File phosphor-hostlogger_%.bbappend:

FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
SRC_URI_append = " file://ttyS2.conf"

File phosphor-hostlogger/ttyS2.conf:

HOST_STATE=/xyz/openbmc_project/state/os

Multi-host support

The single instance of the service can handle only one host console at a time. If OpenBMC has multiple hosts, the console of each host must be associated with its own instance of the Host Logger service. This can be achieved using the systemd unit template.