blob: 7158bfcd5f1bcb0790d7ea03fe5e4b725bfd950e [file] [log] [blame]
// SPDX-License-Identifier: Apache-2.0
// Copyright (C) 2018 IBM Corp.
#include "config.h"
#include <errno.h>
#include <stdint.h>
#include <stdio.h>
#include "backend.h"
#include "common.h"
#include "lpc.h"
#include "mboxd.h"
#include "protocol.h"
#include "windows.h"
#define BLOCK_SIZE_SHIFT_V1 12 /* 4K */
static inline uint8_t protocol_get_bmc_event_mask(struct mbox_context *context)
{
if (context->version == API_VERSION_1) {
return BMC_EVENT_V1_MASK;
}
return BMC_EVENT_V2_MASK;
}
/*
* protocol_events_put() - Push the full set/cleared state of BMC events on the
* provided transport
* @context: The mbox context pointer
* @ops: The operations struct for the transport of interest
*
* Return: 0 on success otherwise negative error code
*/
int protocol_events_put(struct mbox_context *context,
const struct transport_ops *ops)
{
const uint8_t mask = protocol_get_bmc_event_mask(context);
return ops->put_events(context, mask);
}
/*
* protocol_events_set() - Update the set BMC events on the active transport
* @context: The mbox context pointer
* @bmc_event: The bits to set
*
* Return: 0 on success otherwise negative error code
*/
int protocol_events_set(struct mbox_context *context, uint8_t bmc_event)
{
const uint8_t mask = protocol_get_bmc_event_mask(context);
/*
* Store the raw value, as we may up- or down- grade the protocol
* version and subsequently need to flush the appropriate set. Instead
* we pass the masked value through to the transport
*/
context->bmc_events |= bmc_event;
return context->transport->set_events(context, bmc_event, mask);
}
/*
* protocol_events_clear() - Update the cleared BMC events on the active
* transport
* @context: The mbox context pointer
* @bmc_event: The bits to clear
*
* Return: 0 on success otherwise negative error code
*/
int protocol_events_clear(struct mbox_context *context, uint8_t bmc_event)
{
const uint8_t mask = protocol_get_bmc_event_mask(context);
context->bmc_events &= ~bmc_event;
return context->transport->clear_events(context, bmc_event, mask);
}
static int protocol_negotiate_version(struct mbox_context *context,
uint8_t requested);
static int protocol_v1_reset(struct mbox_context *context)
{
return __protocol_reset(context);
}
static int protocol_negotiate_version(struct mbox_context *context,
uint8_t requested);
static int protocol_v1_get_info(struct mbox_context *context,
struct protocol_get_info *io)
{
uint8_t old_version = context->version;
int rc;
/* Bootstrap protocol version. This may involve {up,down}grading */
rc = protocol_negotiate_version(context, io->req.api_version);
if (rc < 0)
return rc;
/* Do the {up,down}grade if necessary*/
if (rc != old_version) {
/* Doing version negotiation, don't alert host to reset */
windows_reset_all(context);
return context->protocol->get_info(context, io);
}
/* Record the negotiated version for the response */
io->resp.api_version = rc;
/* Now do all required intialisation for v1 */
context->backend.block_size_shift = BLOCK_SIZE_SHIFT_V1;
MSG_INFO("Block Size: 0x%.8x (shift: %u)\n",
1 << context->backend.block_size_shift, context->backend.block_size_shift);
/* Knowing blocksize we can allocate the window dirty_bytemap */
windows_alloc_dirty_bytemap(context);
io->resp.v1.read_window_size =
context->windows.default_size >> context->backend.block_size_shift;
io->resp.v1.write_window_size =
context->windows.default_size >> context->backend.block_size_shift;
return lpc_map_memory(context);
}
static int protocol_v1_get_flash_info(struct mbox_context *context,
struct protocol_get_flash_info *io)
{
io->resp.v1.flash_size = context->backend.flash_size;
io->resp.v1.erase_size = 1 << context->backend.erase_size_shift;
return 0;
}
/*
* get_lpc_addr_shifted() - Get lpc address of the current window
* @context: The mbox context pointer
*
* Return: The lpc address to access that offset shifted by block size
*/
static inline uint16_t get_lpc_addr_shifted(struct mbox_context *context)
{
uint32_t lpc_addr, mem_offset;
/* Offset of the current window in the reserved memory region */
mem_offset = context->current->mem - context->mem;
/* Total LPC Address */
lpc_addr = context->lpc_base + mem_offset;
MSG_DBG("LPC address of current window: 0x%.8x\n", lpc_addr);
return lpc_addr >> context->backend.block_size_shift;
}
static int protocol_v1_create_window(struct mbox_context *context,
struct protocol_create_window *io)
{
struct backend *backend = &context->backend;
uint32_t offset;
uint32_t size;
int rc;
offset = io->req.offset << backend->block_size_shift;
size = io->req.size << backend->block_size_shift;
rc = backend_validate(backend, offset, size, io->req.ro);
if (rc < 0) {
/* Backend does not allow window to be created. */
return rc;
}
/* Close the current window if there is one */
if (context->current) {
/* There is an implicit flush if it was a write window
*
* protocol_v2_create_window() calls
* protocol_v1_create_window(), so use indirect call to
* write_flush() to make sure we pick the right one.
*/
if (context->current_is_write) {
rc = context->protocol->flush(context, NULL);
if (rc < 0) {
MSG_ERR("Couldn't Flush Write Window\n");
return rc;
}
}
windows_close_current(context, FLAGS_NONE);
}
/* Offset the host has requested */
MSG_INFO("Host requested flash @ 0x%.8x\n", offset);
/* Check if we have an existing window */
context->current = windows_search(context, offset,
context->version == API_VERSION_1);
if (!context->current) { /* No existing window */
MSG_DBG("No existing window which maps that flash offset\n");
rc = windows_create_map(context, &context->current,
offset,
context->version == API_VERSION_1);
if (rc < 0) { /* Unable to map offset */
MSG_ERR("Couldn't create window mapping for offset 0x%.8x\n",
offset);
return rc;
}
}
context->current_is_write = !io->req.ro;
MSG_INFO("Window @ %p for size 0x%.8x maps flash offset 0x%.8x\n",
context->current->mem, context->current->size,
context->current->flash_offset);
io->resp.lpc_address = get_lpc_addr_shifted(context);
return 0;
}
static int protocol_v1_mark_dirty(struct mbox_context *context,
struct protocol_mark_dirty *io)
{
uint32_t offset = io->req.v1.offset;
uint32_t size = io->req.v1.size;
uint32_t off;
if (!(context->current && context->current_is_write)) {
MSG_ERR("Tried to call mark dirty without open write window\n");
return -EPERM;
}
/* For V1 offset given relative to flash - we want the window */
off = offset - ((context->current->flash_offset) >>
context->backend.block_size_shift);
if (off > offset) { /* Underflow - before current window */
MSG_ERR("Tried to mark dirty before start of window\n");
MSG_ERR("requested offset: 0x%x window start: 0x%x\n",
offset << context->backend.block_size_shift,
context->current->flash_offset);
return -EINVAL;
}
offset = off;
/*
* We only track dirty at the block level.
* For protocol V1 we can get away with just marking the whole
* block dirty.
*/
size = align_up(size, 1 << context->backend.block_size_shift);
size >>= context->backend.block_size_shift;
MSG_INFO("Dirty window @ 0x%.8x for 0x%.8x\n",
offset << context->backend.block_size_shift,
size << context->backend.block_size_shift);
return window_set_bytemap(context, context->current, offset, size,
WINDOW_DIRTY);
}
static int generic_flush(struct mbox_context *context)
{
int rc, i, offset, count;
uint8_t prev;
offset = 0;
count = 0;
prev = WINDOW_CLEAN;
MSG_INFO("Flush window @ %p for size 0x%.8x which maps flash @ 0x%.8x\n",
context->current->mem, context->current->size,
context->current->flash_offset);
/*
* We look for streaks of the same type and keep a count, when the type
* (dirty/erased) changes we perform the required action on the backing
* store and update the current streak-type
*/
for (i = 0; i < (context->current->size >> context->backend.block_size_shift);
i++) {
uint8_t cur = context->current->dirty_bmap[i];
if (cur != WINDOW_CLEAN) {
if (cur == prev) { /* Same as previous block, incrmnt */
count++;
} else if (prev == WINDOW_CLEAN) { /* Start of run */
offset = i;
count++;
} else { /* Change in streak type */
rc = window_flush(context, offset, count,
prev);
if (rc < 0) {
return rc;
}
offset = i;
count = 1;
}
} else {
if (prev != WINDOW_CLEAN) { /* End of a streak */
rc = window_flush(context, offset, count,
prev);
if (rc < 0) {
return rc;
}
offset = 0;
count = 0;
}
}
prev = cur;
}
if (prev != WINDOW_CLEAN) { /* Still the last streak to write */
rc = window_flush(context, offset, count, prev);
if (rc < 0) {
return rc;
}
}
/* Clear the dirty bytemap since we have written back all changes */
return window_set_bytemap(context, context->current, 0,
context->current->size >>
context->backend.block_size_shift,
WINDOW_CLEAN);
}
static int protocol_v1_flush(struct mbox_context *context,
struct protocol_flush *io)
{
int rc;
if (!(context->current && context->current_is_write)) {
MSG_ERR("Tried to call flush without open write window\n");
return -EPERM;
}
/*
* For V1 the Flush command acts much the same as the dirty command
* except with a flush as well. Only do this on an actual flush
* command not when we call flush because we've implicitly closed a
* window because we might not have the required args in req.
*/
if (io) {
struct protocol_mark_dirty *mdio = (void *)io;
rc = protocol_v1_mark_dirty(context, mdio);
if (rc < 0) {
return rc;
}
}
return generic_flush(context);
}
static int protocol_v1_close(struct mbox_context *context,
struct protocol_close *io)
{
int rc;
/* Close the current window if there is one */
if (!context->current) {
return 0;
}
/* There is an implicit flush if it was a write window */
if (context->current_is_write) {
rc = protocol_v1_flush(context, NULL);
if (rc < 0) {
MSG_ERR("Couldn't Flush Write Window\n");
return rc;
}
}
/* Host asked for it -> Don't set the BMC Event */
windows_close_current(context, io->req.flags);
return 0;
}
static int protocol_v1_ack(struct mbox_context *context,
struct protocol_ack *io)
{
return protocol_events_clear(context,
(io->req.flags & BMC_EVENT_ACK_MASK));
}
/*
* get_suggested_timeout() - get the suggested timeout value in seconds
* @context: The mbox context pointer
*
* Return: Suggested timeout in seconds
*/
static uint16_t get_suggested_timeout(struct mbox_context *context)
{
struct window_context *window = windows_find_largest(context);
uint32_t max_size_mb = window ? (window->size >> 20) : 0;
uint16_t ret;
ret = align_up(max_size_mb * FLASH_ACCESS_MS_PER_MB, 1000) / 1000;
MSG_DBG("Suggested Timeout: %us, max window size: %uMB, for %dms/MB\n",
ret, max_size_mb, FLASH_ACCESS_MS_PER_MB);
return ret;
}
static int protocol_v2_get_info(struct mbox_context *context,
struct protocol_get_info *io)
{
uint8_t old_version = context->version;
int rc;
/* Bootstrap protocol version. This may involve {up,down}grading */
rc = protocol_negotiate_version(context, io->req.api_version);
if (rc < 0)
return rc;
/* Do the {up,down}grade if necessary*/
if (rc != old_version) {
/* Doing version negotiation, don't alert host to reset */
windows_reset_all(context);
return context->protocol->get_info(context, io);
}
/* Record the negotiated version for the response */
io->resp.api_version = rc;
/* Now do all required intialisation for v2 */
/* Knowing blocksize we can allocate the window dirty_bytemap */
windows_alloc_dirty_bytemap(context);
io->resp.v2.block_size_shift = context->backend.block_size_shift;
MSG_INFO("Block Size: 0x%.8x (shift: %u)\n",
1 << context->backend.block_size_shift, context->backend.block_size_shift);
io->resp.v2.timeout = get_suggested_timeout(context);
return lpc_map_memory(context);
}
static int protocol_v2_get_flash_info(struct mbox_context *context,
struct protocol_get_flash_info *io)
{
struct backend *backend = &context->backend;
io->resp.v2.flash_size =
backend->flash_size >> backend->block_size_shift;
io->resp.v2.erase_size =
((1 << backend->erase_size_shift) >> backend->block_size_shift);
return 0;
}
static int protocol_v2_create_window(struct mbox_context *context,
struct protocol_create_window *io)
{
int rc;
rc = protocol_v1_create_window(context, io);
if (rc < 0)
return rc;
io->resp.size = context->current->size >> context->backend.block_size_shift;
io->resp.offset = context->current->flash_offset >>
context->backend.block_size_shift;
return 0;
}
static int protocol_v2_mark_dirty(struct mbox_context *context,
struct protocol_mark_dirty *io)
{
if (!(context->current && context->current_is_write)) {
MSG_ERR("Tried to call mark dirty without open write window\n");
return -EPERM;
}
MSG_INFO("Dirty window @ 0x%.8x for 0x%.8x\n",
io->req.v2.offset << context->backend.block_size_shift,
io->req.v2.size << context->backend.block_size_shift);
return window_set_bytemap(context, context->current, io->req.v2.offset,
io->req.v2.size, WINDOW_DIRTY);
}
static int protocol_v2_erase(struct mbox_context *context,
struct protocol_erase *io)
{
size_t start, len;
int rc;
if (!(context->current && context->current_is_write)) {
MSG_ERR("Tried to call erase without open write window\n");
return -EPERM;
}
MSG_INFO("Erase window @ 0x%.8x for 0x%.8x\n",
io->req.offset << context->backend.block_size_shift,
io->req.size << context->backend.block_size_shift);
rc = window_set_bytemap(context, context->current, io->req.offset,
io->req.size, WINDOW_ERASED);
if (rc < 0) {
return rc;
}
/* Write 0xFF to mem -> This ensures consistency between flash & ram */
start = io->req.offset << context->backend.block_size_shift;
len = io->req.size << context->backend.block_size_shift;
memset(context->current->mem + start, 0xFF, len);
return 0;
}
static int protocol_v2_flush(struct mbox_context *context,
struct protocol_flush *io)
{
if (!(context->current && context->current_is_write)) {
MSG_ERR("Tried to call flush without open write window\n");
return -EPERM;
}
return generic_flush(context);
}
static int protocol_v2_close(struct mbox_context *context,
struct protocol_close *io)
{
int rc;
/* Close the current window if there is one */
if (!context->current) {
return 0;
}
/* There is an implicit flush if it was a write window */
if (context->current_is_write) {
rc = protocol_v2_flush(context, NULL);
if (rc < 0) {
MSG_ERR("Couldn't Flush Write Window\n");
return rc;
}
}
/* Host asked for it -> Don't set the BMC Event */
windows_close_current(context, io->req.flags);
return 0;
}
static const struct protocol_ops protocol_ops_v1 = {
.reset = protocol_v1_reset,
.get_info = protocol_v1_get_info,
.get_flash_info = protocol_v1_get_flash_info,
.create_window = protocol_v1_create_window,
.mark_dirty = protocol_v1_mark_dirty,
.erase = NULL,
.flush = protocol_v1_flush,
.close = protocol_v1_close,
.ack = protocol_v1_ack,
};
static const struct protocol_ops protocol_ops_v2 = {
.reset = protocol_v1_reset,
.get_info = protocol_v2_get_info,
.get_flash_info = protocol_v2_get_flash_info,
.create_window = protocol_v2_create_window,
.mark_dirty = protocol_v2_mark_dirty,
.erase = protocol_v2_erase,
.flush = protocol_v2_flush,
.close = protocol_v2_close,
.ack = protocol_v1_ack,
};
static const struct protocol_ops *protocol_ops_map[] = {
[0] = NULL,
[1] = &protocol_ops_v1,
[2] = &protocol_ops_v2,
};
static int protocol_negotiate_version(struct mbox_context *context,
uint8_t requested)
{
/* Check we support the version requested */
if (requested < API_MIN_VERSION)
return -EINVAL;
context->version = (requested > API_MAX_VERSION) ?
API_MAX_VERSION : requested;
context->protocol = protocol_ops_map[context->version];
return context->version;
}
int protocol_init(struct mbox_context *context)
{
protocol_negotiate_version(context, API_MAX_VERSION);
return 0;
}
void protocol_free(struct mbox_context *context)
{
return;
}
/* Don't do any state manipulation, just perform the reset */
int __protocol_reset(struct mbox_context *context)
{
enum backend_reset_mode mode;
int rc;
windows_reset_all(context);
rc = backend_reset(&context->backend, context->mem, context->mem_size);
if (rc < 0)
return rc;
mode = rc;
if (!(mode == reset_lpc_flash || mode == reset_lpc_memory))
return -EINVAL;
if (mode == reset_lpc_flash)
return lpc_map_flash(context);
assert(mode == reset_lpc_memory);
return lpc_map_memory(context);
}
/* Prevent the host from performing actions whilst reset takes place */
int protocol_reset(struct mbox_context *context)
{
int rc;
rc = protocol_events_clear(context, BMC_EVENT_DAEMON_READY);
if (rc < 0) {
MSG_ERR("Failed to clear daemon ready state, reset failed\n");
return rc;
}
rc = __protocol_reset(context);
if (rc < 0) {
MSG_ERR("Failed to reset protocol, daemon remains not ready\n");
return rc;
}
rc = protocol_events_set(context,
BMC_EVENT_DAEMON_READY | BMC_EVENT_PROTOCOL_RESET);
if (rc < 0) {
MSG_ERR("Failed to set daemon ready state, daemon remains not ready\n");
return rc;
}
return 0;
}